Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastron G100.A70.N - TPS - Elastron Kimya A.S.

Material Data Center offers the following functions for Elastron G100.A70.N:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Elastron G datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.0198 mm/mm ASTM D 955
Contração após a moldagem, perpendicular 0.0126 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência à tração na ruptura 6 MPa ASTM D 638
Deformação na ruptura 750 % ASTM D 638
Módulo a 100% alongamento 2.4 MPa ASTM D 412
Módulo a 300% alongamento 3.5 MPa ASTM D 412
Dureza Shore A 70 - ASTM D 2240
Resistência ao rasgamento 35 kN/m ASTM D 624
Resistência à compressão, 22 hr @ 73 °F 20 % ASTM D 395
Resistência à compressão, 22 hr @ 158 °F 50 % ASTM D 395
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
UL94 flamabilidade HB - UL 94
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1170 kg/m³ ASTM D 792
Características
Processamento
Moldagem por injeção
Forma de entrega
Cor natural
Características
Soft Feel
Resistência Química
Resistência química geral, Resistência ao ozônio
Aplicaciones
Automóvel
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.